GEMBench has been loaded into the faster AlternateRAM on SmartBoard. That's why the benchmark result for RAM access is quite high. Access to ST-RAM is the same as on a standard ST.
SmartBoard ST + SpeedUp16+
-
Administrator
- Site Admin
- Posts: 41
- Joined: 03 Jan 2016 17:23
- Contact:
SmartBoard ST + SpeedUp16+
During the winter months I have combined my SmartBoard for ST with a 16MHz 68000 speeder (SpeedUp16+).
The speeder comes without L1 cache so the boost is just marginal (+13%) in respect to a standard ST. SmartBoard ST on the other hand comes with 4/18/16MB SIMM and with 60ns or 70ns RAM it can be accessed much faster than the standard ST-RAM, but an 8MHz CPU cannot benefit from that. This time the CPU is the weakest link of the chain. So by tweaking SmartBoard a little bit and introducing FastLINK the results are quite impressive even with a 16MHz CPU without cache I think.
GEMBench has been loaded into the faster AlternateRAM on SmartBoard. That's why the benchmark result for RAM access is quite high. Access to ST-RAM is the same as on a standard ST.
The speeder comes without L1 cache so the boost is just marginal (+13%) in respect to a standard ST. SmartBoard ST on the other hand comes with 4/18/16MB SIMM and with 60ns or 70ns RAM it can be accessed much faster than the standard ST-RAM, but an 8MHz CPU cannot benefit from that. This time the CPU is the weakest link of the chain. So by tweaking SmartBoard a little bit and introducing FastLINK the results are quite impressive even with a 16MHz CPU without cache I think.
GEMBench has been loaded into the faster AlternateRAM on SmartBoard. That's why the benchmark result for RAM access is quite high. Access to ST-RAM is the same as on a standard ST.
Who is online
Users browsing this forum: No registered users and 2 guests