Diagnostic version error on Falcon

Topics that relate to the All-In-One Diagnostic Cartridge
Post Reply
mikro
Posts: 4
Joined: 13 Apr 2018 01:11
Contact:

Diagnostic version error on Falcon

Post by mikro »

It took some time but I could finally try all the products I had ordered nearly two years ago. So after unpacking everything I'm happy to report everything (RTC module, RAM card, diagnostic cartridge) works however the cart gives me a curious error message when reaching RAM test:
MVIMG_20180618_204631.jpg
Any idea what that means? Jumpers should be set correctly for the Falcon.
You do not have the required permissions to view the files attached to this post.
mikro
Posts: 4
Joined: 13 Apr 2018 01:11
Contact:

Re: Diagnostic version error on Falcon

Post by mikro »

Just to extend my description: this message appears before I can set any individual test -- i.e. during the initialisation part. When it's reaches testing how much memory is available, it gives me this.
User avatar
Administrator
Site Admin
Posts: 41
Joined: 03 Jan 2016 17:23
Contact:

Re: Diagnostic version error on Falcon

Post by Administrator »

I have seen it before myself. My guess was that during EOL test Atari stored the version of the diag software somewhere in NVRAM.
But removing the battery did not help at all. Soures for an older version of diag software exist (IIRC 1.21) but I haven't looked into the problem yet.
mikro
Posts: 4
Joined: 13 Apr 2018 01:11
Contact:

Re: Diagnostic version error on Falcon

Post by mikro »

Administrator wrote:
24 Jun 2018 10:12
But removing the battery did not help at all. Soures for an older version of diag software exist (IIRC 1.21) but I haven't looked into the problem yet.
I have. Your guess was right. There's a check for 'BRS' at index 26. If it's valid, the version at index 21 represents version number of cartrige used for preburn.

There are two ways to work around it:
- clear NVRAM: don't use tools which reset only known fields, a complete NVRAM reset is needed (CTRL+ALT+SHIFT+UNDO during memory test)
- update NVRAM: there's a secret key 'u' which can be pressed during the check -- that way the test will be skipped and new (current) value written to NVRAM

So fortunately it's easy to fix and cartridge now works as it should. Phew.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest